Sintering Woven Wire Mesh Filter Tube - Customizing Size And Finess
The MultiLayer sintered wire mesh is made by the multilayer metal
woven wire mesh through the special stromatolithic
pressing and vacuum sintering. It is a new filter media with high
mechanical strength and monolithic rigid structure.
The standard sintered mesh, 5layer Sintered Stainless Steel Wire
Mesh consists five layers, the protective layer,
the filter layer, the dispersion layer, and two reinforcing layers.
It provides excellent performances such
as excellent precision and high strength, corrosion and heat
resistance, so it is a kind of ideal filter material
for applications that high strength and high temperature required.
Due to its smooth mesh hole structure, this filter material is of
excellent backwashing and reusable function.
Therefore, it can be reused for al long time, and is especially
suitable for continuous and automatic operation,
the character of which can't be exceeded by any other kind of
filter materials.
Furthermore, this filter material is easy to be formed, machined
and welded. It can be produced into
many kinds of shapes such as circular, cartridge, cone and pleats
etc.
Characterictics of sintered wire mesh filter tube
· Wide range of filter rating
It has the steady filter rating from the 1micron to 100micron.
· Steady filter rating
Due to the two protective layers, the mesh of the filter layer is
not easy to deform.
· High mechanical strength
Owing to the support of fourth and fifth layers, it has higher
resistance to pressure and mechanical strength.
· Easy to wash
It is very easy to wash, especially to reverse wash, by virtue of
adopting the surface layer filtration material
· Heat resistance
It can resist the heat up to the 480 C.
· Corrosion resistance
It has the property of anti-corrosion as a result of adopting the
material of SUS316L.
· Tractability
It suits for many kinds of machining, such as cutting, bending,
punching, stretching, welding and so on.
Product Description of sintered wire mesh filter elements
Product Shape
| rectangle,square,round,oval,circular,rectangular,cap,waist and
abnormity
|
| Structure | Single layer,double layer and multi-layers |
Process Technique
| spot welded,edge covering and sintered |
| Material | stainless steel mesh,galvanized wire mesh,copper wire mesh,dutch
weave wire mesh,black wire mesh,perforated metal mesh etc.
|
Edge Material
| stainless steel sheet,copper sheet,galvanized sheet,aluminum
sheet,rubber ect |
Out diameter
| usually 5-600mm |
